FN 1911 Four 500 cc 4 cyl aiv



FN 498 cc  1911    four cylinder   overhead inlet valve  engine#1084 frame# 36561 

To many enthusiasts the FN four has always been one of the most appealing machines of veteran and vintage times. 
Its production ran from 1905 till 1926.
The earliest type had a 362 cc engine with automatic  overhead inlet valves and side exhaust valves. 
The machine was single  geared,  had shaft drive and the top speed was about 60 km/hour. 
The FN four was an immediate success and found customers all over the world; FN sold its machines in more than 40 countries. 
It found many customers in the U.S.A. and made Americans  interested in the four cylinder concept:  Percy Pierce purchased a 1908 model on one of his trips to Europe and the FN became a point of reference for the first Pierce Four in 1909. 
The engine was redesigned for 1910. 
New cylinders had twelve fins rather than eleven, the bore was increased to 52.7 mm to give 498 cc, and the exhaust pipes were now attached with two bolts to a flange in contrast to the earlier screw-on pattern. 
The spark plugs were moved from the top of the cylinders to the right side between the valves. 
The inlet manifold was substantially revised to site the new carburettor at the left of the engine between cylinders two and three.  
A nice touch was a fuel filter mounted on the seat tube of the frame. 
There was also a new oiling system. 
The only major change to the cycle parts was a long rebound spring on top of the front fork.
The 1910 model continued unchanged through 1911. 
The 2 speed gearbox was sold as an aftermarket accessory; many owners had one fitted and when FN brought out its 1913 model it was equipped with a 2 speed gearbox of very similar layout…..
This  sought-after and practical veteran ( clutch and gears!) is unrestored.

For interesting  FN four info: http://users.senet.com.au/~mitchell/bikes/fn/html/earlyfn.htm